Philips ADD5910M Manual Del Usuario página 7

2. Parts and features
This is an instant heating water dispenser. With instant heating technology, it provides hot water
with different temperatures within seconds. Thanks to the Philips Micro X-Clean filter, you
can always enjoy the crispy and pure tasting water at home.
Control panel
Tea program
Press to quickly set 100℃, 250ml.
Safety lock
When hot water ≥40℃ is chosen, press to unlock before pressing the dispense button.
It can also be used to wake up the appliance when it is under the sleep mode.
Water temperature selection
Press to choose desired water temperature.
Water volume selection
Press to choose desired water volume.
Dispense button
Press to start or stop dispensing.
Cleaning/descale button
Long press for 3 seconds to start the cleaning/descaling process. During cleaning/descaling,
press the button to pause, and press it again to restart. Note: the whole descale process is
around 10minutes and cannot be cancelled until it is �nished.
Descale indicator
Lights up when it is time to descale. Lights off after the descaling process completes.
Water shortage indicator
Lights up when the water in the water tank is below the minimal level. Please re�ll the water tank.
Filter lifetime indicator
4 grids light up: the �lter has a full lifetime.
2 grids light up: the �lter has half of the lifetime left.
4 grids �ashes: the �lter reaches the end of life.
Filter lifetime reset
Long press both buttons for 3 seconds to reset the �lter lifetime.
03