HIKVISION DS-2TD2136T-15 Guia De Inicio Rapido página 52

identifies the negative terminal(s) of equipment
which is used with, or generates direct current.
Battery
● Risk of explosion if the battery is replaced by an
incorrect type. Dispose of used batteries according
to the instructions. Il y a risque d'explosion si la
batterie est remplacée par une batterie de type
incorrect. Mettre au rebut les batteries usagées
conformément aux instructions.
● The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
● For long-term storage of the battery, make sure it is
fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
● This equipment is not suitable for use in locations
where children are likely to be present.
● Improper replacement of the battery with an
incorrect type may defeat a safeguard (for example,
in the case of some lithium battery types).
● Do not dispose of the battery into fire or a hot oven,
or mechanically crush or cut the battery, which may
result in an explosion.
● DO NOT leave the battery in an extremely high
temperature surrounding environment, which may
result in an explosion or the leakage of flammable
liquid or gas.
● DO NOT subject the battery to extremely low air
pressure, which may result in an explosion or the
leakage of flammable liquid or gas.
Installation
● Never place the equipment in an unstable location.
The equipment may fall, causing serious personal
injury or death.
● This equipment is for use only with corresponding
brackets. Use with other (carts, stands, or carriers)
may result in instability causing injury.
System Security
● You acknowledge that the nature of Internet
provides for inherent security risks, and our
company shall not take any responsibilities for
abnormal operation, privacy leakage or other
damages resulting from cyber attack, hacker attack,
however, our company will provide timely technical
support if required.
● Please enforce the protection for the personal
information and the data security as the device
may be confronted with the network security
problems when it is connected to the Internet.
Please contact us when the device might exist
network security risks.
● Please understand that you have the responsibility
to configure all the passwords and other security
settings about the device, and keep your user name
and password.
Maintenance
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
Câble et interface
N°
1
Bouton de réinitialisation
Fonction
maintenance.
● A few device components (e.g., electrolytic
capacitor) require regular replacement. The
average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified
by the manufacturer, the protection provided by
the device may be impaired.
● To reduce the risk of fire, replace only with the
same type and rating of fuse.
● The serial port of the equipment is used for
debugging only.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -40 °C to 65 °C (-40 °F to
149 °F), and humidity shall be 5% to 95%.
● Place the device in a dry and well-ventilated
environment.
● DO NOT expose the device to high electromagnetic
radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright
light.
● The equipment shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the equipment.
● No naked flame sources, such as lighted candles,
should be placed on the equipment.
● Provide a surge suppressor at the inlet opening of
the equipment under special conditions such as the
mountain top, iron tower, and forest.
● Burned fingers when handling the parts with
symbol . Wait one-half hour after switching off
before handling the parts.
Emergency
● If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
Manufacture Address
No.555 Qianmo Road, Binjiang District, Hangzhou
310052, China
Hangzhou Hikvision Digital Technology Co., Ltd.
COMPLIANCE NOTICE: The thermal series products
might be subject to export controls in various
countries or regions, including without limitation, the
United States, European Union, United Kingdom
and/or other member countries of the Wassenaar
Arrangement. Please consult your professional legal or
compliance expert or local government authorities for
any necessary export license requirements if you
intend to transfer, export, re-export the thermal series
products between different countries.
N°
7 Câble d'alarme 2
4
Français
Fonction