Bosch BCM3100 Manual De Instrucciones página 5

Safety Instructions
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Read and observe the safety warnings and directions
u
contained in all the eBike system operating instruc-
tions and in the operating instructions of your eBike.
Have installation and all repairs to the ConnectModule
u
performed only by an authorised specialist dealer.
Specialist knowledge is required here. Incorrect installa-
tion may mean that the ConnectModule or eBike can no
longer be operated in a legally compliant manner.
The ConnectModule is equipped with a wireless inter-
u
face. There may therefore be local operating restric-
tions, e.g. in aircraft or hospitals. In this instance, fol-
low the instructions below under (see "Transport",
page English – 2).
Product Description and
Specifications
Intended Use
The ConnectModule is exclusively for use with the related
features from the eBike Flow app. Therefore, a mobile
device is required, on which the eBike Flow app is down-
loaded and installed.
The ConnectModule is exclusively for use in combination
with an eBike, particularly for tracking eBikes in the event of
theft.
Technical Data
ConnectModule
Product code
Internal battery
External battery connection
Frequency band LTE Cat-M1 MHz
Transmission power
Weight, approx.
Operating temperature
Storage temperature
Protection rating
Bosch eBike Systems
BCM3100
V 4.35
mAh 650
V 12
B1 (2100 MHz)
B2 (1900 MHz)
B3 (1800 MHz)
B4 (1700 MHz)
B5 (850 MHz)
B8 (900 MHz)
B12 (700 MHz)
B13 (700 MHz)
B20 (800 MHz)
B28 (700 MHz)
dBm 20
g 40
°C –5 to +40
°C +10 to +40
IP54
Declaration of Conformity
Robert Bosch GmbH, Bosch eBike Systems, hereby declares
that the ConnectModule radio communication unit com-
plies with Directive 2014/53/EU. The full text of the EU De-
claration of Conformity is available to view at the following
website: https://www.bosch-ebike.com/conformity.
Robert Bosch GmbH, Bosch eBike Systems, hereby declares
that the ConnectModule radio communication unit com-
plies with the Radio Equipment Regulations 2017 (SI
2917/1206). The full text of the UK Declaration of Conform-
ity can be accessed at the following Internet address:
https://www.bosch-ebike.com/conformity.
Operation
For the ConnectModule to function, a functioning GPS and
mobile connection are prerequisites.
The ConnectModule has motion sensors, a global navigation
satellite system and mobile communications. This means the
ConnectModule can identify suspicious movements of the
eBike, determine the local position of the eBike and gener-
ate a local alarm.
Positions and movement data are displayed to the owner of
the eBike in the eBike Flow app.
The ConnectModule thereby also facilitates other services,
such as <eBike Alarm>, which is provided for the end cus-
tomer in the eBike Flow app. Additional information regard-
ing the individual services of the eBike Flow app are
provided in the app.
Costs may be incurred for use of these services. Details are
displayed in the eBike Flow app.
Starting Operation
As soon as a ConnectModule is installed in an eBike, it can
be activated once via the eBike Flow app.
Services such as <eBike Alarm> can be activated and used
via the eBike Flow app.
Depending on the smartphone's operating sys-
tem, the eBike Flow app can be downloaded
free of charge from the Apple App Store and
the Google Play store.
Use your smartphone to scan the code in order to download
the eBike Flow app.
The ConnectModule services can be deactivated at any time
via the eBike Flow app. The user can reactivate all services
as long as the user has a valid activation.
Deactivation of the ConnectModule itself is not provided.
Switching On and Off
The ConnectModule does not have to be switched on or off
separately.
As long as the ConnectModule is supplied with voltage and
the relevant services are activated, it sends data to the bi-
cycle owner.
English – 1
0 275 008 3CM | (02.03.2022)