SAFETY
Intended use
The devices which constitute this RF remote control switch set
are intended for personal use only. It is not suitable for com-
mercial use.
The RF remote control switch set is used for switching lamps
and electrical appliances on and off. The receivers are suitable
for outdoor use.
The devices may only be operated individually. Do not stack
several socket switches together.
Any other use is considered non-intended use. The manufac-
turer assumes no liability for damage caused by non-intended
use.
Operating manual
Read this operating manual through carefully before
using the device. Keep the operating manual in a safe
place. Should you pass on this device to another party be
sure to include the operating manual.
Basic safety instructions
Children are not aware of the dangers that may arise from im-
•
proper handling of electrical devices. Never allow children to
use electrical devices without supervision.
Risk of suffocation! Do not leave the packaging material lying
•
around. Children could swallow the small parts and choke on
them.
Plug the socket switches into conventional 220-240VAC/50Hz
•
two-pin earthed sockets only.
Do not connect the socket switches to extension cables.
•
Only connect appliances that are within the performance
•
limits of the socket switches.
Do not connect consumers (for example irons) which could
•
cause re or other damage if they are accidentally switched
on.
Do not connect consumers (for example refrigerators) which
•
require condenser motors.
15