Descargar Imprimir esta página

Whirlpool MBNA910X Guía Rápida página 4

Ocultar thumbs Ver también para MBNA910X:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
CLEANING
Make sure that the appliance has cooled down before
carrying out any maintenance or cleaning.
INTERIOR AND EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Clean the glass in the door with a suitable liquid
detergent.
• At regular intervals, or in case of spills, remove the
turntable and its support to clean the bottom of the
oven, removing all food residue.
TROUBLESHOOTING
Problem
The oven is not working.
The display is showing "Err".
The display shows unclear text and
appears to be broken.
Policies, standard documentation and additional product information can be found by:
Visiting our website
Using QR Code
Alternatively,
When contacting our After-sales Service, please state the codes provided on your product's
identification plate.
4
Possible cause
Power cut.
Disconnection from the mains.
Software fault.
Another language set.
docs . whirlpool . eu
contact our After-sales Service
Never use steam cleaning equipment.
Do not use wire wool, abrasive scourers or abrasive/
corrosive cleaning agents, as these could damage the
surfaces of the appliance.
ACCESSORIES
All accessories are dishwasher safe. For stubborn dirt,
rub gently with a cloth.
Solution
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Contact you nearest After-sales Service Centre and state
the letter or number that follows "Err".
Contact you nearest Client After-sales Service Centre.
(See phone number in the warranty booklet).
XXX/XXX
XXXXXXXXXXXX
XXXXXXXXXXXX

Publicidad

loading