PNI PMR R18 Manual De Usuario página 11

13 R-CDC
14 T-CDC
15 STEP
16 NAME
17 ROGER
Channel scan
Press the FUN key + 1 SCAN. "SCAN?" will appear on the screen. Press the ENT/ key to start scanning. The scan will stop for 5
seconds if a signal is detected on a channel, after which the scan will continue. Press any key except the PTT and ENT/ key to exit
the scan mode.
Scan priority channels
Press the FUN key + 2 PRI. "PRI?" will appear on the screen. Press the ENT/ key to start scanning. The scan will stop for 5 seconds
if a signal is detected on a channel, after which the scan will continue. Press any key except the PTT and ENT/ key to exit the scan
mode.
VOX sensitivity
Press FUN key + 3 VOX. "VOX?" will appear on the screen. Press the ENT/ key to enter the interface with options: OFF, 1-9. 9
levels of sensitivity are available. Turn the channel selector until you reach the desired option. Press the ENT/ key again to confirm
the selection.
The VOX function allows you to transmit without pressing the PTT key. The show is activated by voice and will stop automatically as
soon as you stop talking.
RX CTCSS/DCS
TX CTCSS/DCS
Frequency step
Edit channel name
Roger Beep
OFF-254.1 / D023-D754
OFF-254.1 / D023-D754
2.5K/5K/6.25K/10K/12.5K/25K/50K/100K
OFF/ON
OFF/ON
User manual - 11