Publicidad
FINAL ASSEMBLY
4. Press the shelf hole plugs [SS143] into the unused holes inside the cabinet. Place the screw head caps [SS672] over any exposed
screw heads.
5. Install a Robern logo coverplate [211-1329] into each unused electrical access hole.
6. Insert clear shelf clips [221-1376 and 211-1377] into the holes in the back channel on the sides of the cabinet.
7. Push the back of the shelf into both the left and right clips (A). Snap the shelf down into the clips (B).
4
6
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
5
7
11
A
B
Part no. CB-209-1441 06/15/2022
Murray Hill Cabinet
Publicidad
