Publicidad
REMOTE CONTROL CONNECTIONS
ON / OFF
External MUTE
LOCAL CONTROL
Attenuators
Output mode settings
RUN/SLEEP mode
Power ON/OFF
CONNECTIVITY
DANTE™ Protocol
Programming and control
MONITORING
Signal Present
Standby / Mute
No
GPIs
x4 GPIs (0-10V)
Function and settings by embeded web application
5-pin Euroblock connector, rear panel. Euroblock pitch 3,5
mm
GPOs
x4 NC / NO contacts
4x 3pins Euroblock connector, rear panel
Euroblock pitch 3,5 mm
Yes, contact (2 pins Euroblock connector, rear panel,
Euroblock pitch 3,5 mm)
Programmable Front panel knobs (defaults: Amplified OUTs
attenuators)
Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω
Output mode selection per channel
(Rear panel DIP SWITCH selectors)
Yes, front panel push-button (operate when pressed more than
0,5 seconds)
Yes, back panel switch (red LED indicator)
Ethernet
Ethernet Base-Tx 10/100/1000Mb Auto X-Over
(CAT5 up to 100m. Settings by embeded web application)
Dante™ 4x Tx / 4x Rx channels
Primary and secondary capability. RJ-45 ports
(Settings by embeded web application)
Embedded web application
SP LED (White) per channel (trigger @- 40 dBV)
Clipping
CLIP LED (Red) per channel (Clip, Versa power limiter, Peak
power, Power supply overload)
Protect
PROT LED (Red) per channel (Current overload, Output short
circuit, Under voltage, Over Voltage,
DC OUT (slow blink), HF protect (fast blink)
STBY/MUTE LED (White) per channel
(ON when STBY, BLINK when MUTE)
Limit
LIMIT LED (Red) per unit
(Power (power supply) overload)
Thermal
THERMAL LED (Red) per unit (Temperature limiter)
Dante™
DANTE™ LED (White) per unit (OFF NO WIRE, ON when
MASTER, BLINK when SLAVE)
Data
DATA LED (White) per unit (ON when DATA)
On
ON LED (White) per unit (ON when RUN,
SLOW BLINK when SLEEP by BUTTON, FAST BLINK when
SLEEP by AUTOSTBY, VERY FAST BLINK when HW Faultnit)
19
Publicidad
