Operation
Using the menu
The device is equipped with a user-friendly menu. The menu appears
on the screen.
The following types of storage media can be read:
● SD/SDHC cards
● MMC cards
● Memory sticks
● USB storage media
Switch on the device by pressing the ON/OFF switch
NOTE
► When the device starts up for the fi rst time, a language selection
menu opens. Select the operating language you wish to use in
this menu.
The device always starts automatically with the setup. To enter the
setup menu press the "Enter/Play" button [] on the device or the SE-
TUP button on your remote control.
NOTE
► The currently selected mode (setup/memory card/USB) is al-
ways highlighted clearly in blue.
Open the main menu using the "MENU" button. In the menu, use the
"◄►" buttons to move around, and select the desired function.
When you confi rm your selection by pressing "ENTER", a correspon-
ding submenu appears. Again, use the "▲" or the "▼" button to move
around, and select the desired line. The selected line is highlighted in
colour.
Confi rm your selection using the "ENTER" button. Usually, an addi-
tional menu will then appear, in which you move around using the
"◄►▼▲" buttons to select the desired setting.
Press the „Return" button to exit the current menu level.
For orientation purposes, the menu structure is also included in the
Appendix.
You can control the device using the buttons on the rear or with the
included remote control.
GB
35