Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
CLEARING A CLOGGING DISCHARGE CHUTE
Hand contact with the rotating auger assembly inside the discharge chute is the most common
cause of injury associated with snow blowers. Never use your hand to clean out the discharge
chute.
To clear the chute:
• SHUT THE MOTOR OFF!
• Wait 10 seconds to be sure the auger assembly blades have stopping rotating.
• Always use a clean-out tool, not your hands.
MAINTENANCE AND STORAGE
• Check all bolts or fasteners at frequent intervals for proper tightness to be sure the
equipment is in safe working condition.
• Always refer to operator's manual for important details if the snow blower is to be stored for
an extended period.
• Maintain or replace safety and instruction labels, as necessary.
• Run the machine a few minutes after blowing snow to prevent freeze-up of the auger
assembly.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who
may use this tool. If you lend this tool to someone else, also lend these instructions to them to
prevent misuse of the product and possibly injury.
PREPARATION
Know Your Snow Blower
You may use this product for purpose listed below:
Removing snow from areas such as driveways and sidewalks.
Before attempting to use the snow blower, familiarize yourself with all of its operating features
and safety requirements.
WARNING
•
Do not allow familiarity with the tool to cause carelessness. Remember that one careless
moment is enough to cause severe injury. Before attempting to use any tool, be sure to
become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
10
Publicidad
