PNI Safe House IDB10 Manual De Usuario página 6

and log in.
Automatic configuration
1. Make sure that the LED indicator on the
camera is flashing, a sign that the device is
in pairing mode. If the LED does not blink,
press the Reset key for 10 seconds.
2. In your phone, activate the Bluetooth
and GPS Location functions.
3. Open the Tuya Smart application. The
application will automatically scan nearby
Bluetooth devices.
4. After your device has been identified,
press "Add".
5. Select the WiFi network you want to
connect to and add the network password.
6. Wait for the device to be added to the
application. To finish, press "Done".
User manual - 6