PNI GreenHouse SC1800C PRO Manual De Usuario página 24

Priority charging
10
source
Maximum
charging current:
to configure the
maximum charging
current for solar
chargers or from
the public grid
11
(max charging
current = charging
current from the
public grid (Utility)
+ charging current
from the solar
source)
User manual
If the inverter operates in Line, Standby or fault
mode, the load source can be set as follows
Solar Priority
Solar and Utility
(default)
Just Solar
If the inverter operates in battery mode or energy
saving mode, only the solar source can charge the
battery. Solar energy will charge the battery only
if it is available and is sufficient.
MPPT-60A
24
Solar energy will charge
the battery as the priority
source. The battery will be
charged from the public grid
only if the solar source is not
available.
The solar source and the
Utility will charge the
battery at the same time.
The solar source will be the
only source of charging
the battery, regardless of
whether the energy from
the public grid is available or
not.
The range that can be set is
between 1A and 80A.