Lionelo Babyline 6.2 Manual De Usuario página 25

wake up automatically when sound is detected. To turn off VOX mode,
press the button again.
Temperature alarm settings
1. In the main menu, select "Temperature alarm" (A, fig. 6).
2. Select the unit in which the room temperature is to be displayed
– degrees Celsius or Fahrenheit (B, fig. 6).
3. If the temperature exceeds or falls below a value in the default
range of 18 - 30°C (64 - 86°F), an alarm lasting about 30 seconds
will be triggered and an icon will appear on the screen (
4. To turn off the temperature alarm, select OFF (B, fig. 6).
Melodies
1. In the main menu, select "Music" (fig. 7). Select one of the eight available
lullabies (A, fig. 7) or nature sounds (B, fig. 7) and press the OK button.
2. It is possible to play a selected melody in continuous mode (C, fig.
7) or all melodies in a loop (D, fig. 7).
The selected melody will play on both the camera and the monitor.
Display settings
1. In the main menu, select the "Display" option.
2. Select the time after which the display should go into sleep mode
(fig. 8): 1 minute, 10 minutes, 30 minutes, or continuously on (fig. 8).
Brightness and volume settings
Press the button (7, fig. C), then adjust the brightness of the screen
with the upper and lower direction buttons, and the volume with the
right and left buttons.
Two-way audio communication
Press and hold the two-way communication button (8, fig. C) to start
audio transmission, release to abort.
‑ 25 ‑
).
EN