Descargar Imprimir esta página

Silvercrest SSMS 600 E6 Instrucciones De Uso página 68

Ocultar thumbs Ver también para SSMS 600 E6:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

We recommend the following operating times:
Allow the hand blender 5 to cool down for around 2 minutes after 1 minute of
operation.
Let the liquidiser cool down for around 2 minutes after 1 minute of operation.
Allow the whisk q to cool down for around 10 minutes after 3 minutes of operation.
If you exceed these operating times, the appliance can overheat and be damaged!
Safety instructions
RISK OF ELECTRIC SHOCK
Connect the appliance only to mains power sockets supplying
a mains power voltage of 220 – 240 V ∼, 50 – 60 Hz.
Remove the plug from the mains power socket in event of
operating malfunctions and before cleaning the appliance.
Do not expose the appliance to moisture and do not use it
outdoors.
If liquid gets into the housing, disconnect the appliance from
the mains power socket immediately and have it repaired by
a qualified technician.
Always pull on the plug to disconnect the appliance from the
mains; never pull on the power cable itself.
Do not kink or crush the power cable, and route the cable so
that it cannot be stepped on or tripped over.
To prevent accidents, have defective plugs and/or power
cables replaced immediately by an authorised specialist, or
our Customer Service or a similarly qualified person.
This appliance may be used by people with reduced physical,
sensory or mental capabilities or lack of experience and/or
knowledge if they are supervised and have been instructed
in how to use the appliance safely and have understood the
potential risks.
The appliance and its connecting cable must be kept away
from children.
SSMS 600 E6
GB │ MT
 65

Publicidad

loading