Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the de-
vice. The operating instructions are intended to help
the user to become familiar with the machine and take
advantage of its application possibilities in accordance
with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profession-
ally and economically, how to avoid danger, costly re-
pairs, reduce downtimes and how to increase reliability
and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed concern-
ing the operation of the machine and who are informed
about the associated dangers.
24 | GB
The minimum age requirement must be complied with.
In addition to the safety notices contained in this op-
erating manual and the particular instructions for your
country, the generally recognised technical regulations
for the operation of identical devices must be complied
with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information..
2. Layout
1.
Handle
2.
Plasma cutter
3.
Mains plug
4.
Plasma hose package
5.
Ground terminal
6.
Mains indicator lamp
7.
Work light
8.
Overheat protection indicator lamp
9.
Ground terminal connection socket
9a.
Ground terminal plug
10.
Plasma burner connection socket
10a. Plasma burner plug
11.
Plasma burner power socket
11a. Plasma burner power plug
12.
Current controller
13.
Plasma burner
14.
Plasma burner button
15.
Ceramic cap
16.
Nozzle
17.
Diffuser
18.
Electrode
19.
Compressed air hose
20.
Quick connector compressed air hose
21.
Rotary knob to regulate the pressure
22.
Manometer
23.
Condensation water tank
24.
On/off - switch
3. Scope of delivery
A.
Plasma cutter(1x)
B.
Compressed air hose (1x)
C.
Ground cable with terminal (1x)
D.
Plasma hose package (1x)
E.
Hose clamp (1x)
F.
Nozzle (3x) (1x pre-assembled)
G.
Electrodes (3x) (1x pre-assembled)
H.
Operating instruction (1x)
I.
Diffuser (1x pre-assembled)
www.scheppach.com
Publicidad
