PowerA 1346333-02 Guia De Inicio Rapido

CHARGING STAND
for DUALSHOCK®4
Wireless Controllers
SUPPORT DE CHARGE
pour les manettes de jeu sans fil
DUALSHOCK®4
USER MANUAL | Manuel de l'utilisateur | Bedienungsanleitung | Manual de usuario | Manuale per l'uso | Manual do usuário
1 Connect USB Charging Adapter
ENGLISH
CONTENTS
(1) Charging Stand
(1) USB Charging Adapter
USE
1. Connect the USB Charging Adapter to the Micro B input
located on your DUALSHOCK®4 wireless controller.
2. Connect the Charging Stand to your PlayStation®4 USB
input or any other powered USB input by connecting the
USB plug into a powered USB input.
3. Place your DUALSHOCK®4 wireless controller on the
Charging Stand, and press down. The DUALSHOCK®4
wireless controller will illuminate orange to indicate
charging status. When fully charged the DUALSHOCK®4
wireless controller illumination will turn "OFF" indicating
a full charge.
TROUBLESHOOTING
Q1. The Charging Stand is connected to my
PlayStation®4, but its not charging.
A1. Make sure your PlayStation®4 is in "rest" mode or
powered "ON". The USB inputs on the PlayStation®4 are not
active when the PlayStation®4 is completely powered "OFF"
Q2. My DUALSHOCK®4 wireless controller is charging
but the illumination is not Orange?
A2. If your DUALSHOCK®4 wireless controller is still
paired to the PlayStation®4 while you are charging the
illumination will remain your "Channel" color.
Q3. How do I check the charge status of my
DUALSHOCK®4 wireless controller?
A3. Pair your DUALSHOCK®4 wireless controller to the
PlayStation®4 and check the on-screen battery indicator
for charge status.
FCC STATEMENT (US ONLY)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation. Warning:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment. Note: This equipment
has been tested and found to comply with the limits for
Class B digital device, pursuant to Part 15 of the FCC Rules.
CAN ICES-003(B)/NMB-003(B) (CANADA ONLY)
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada's licence-exempt RSS(s).
2 Connect the Charging Stand
Operation is subject to the following two conditions:
1. This device may not cause interference;
2. This device must accept any interference, including
interference that may cause undesired operation of
the device
MANUFACTURED BY
ACCO Brands USA LLC, 4 Corporate Way, Lake Zurich, IL 60047
ACCOBRANDS.com | POWERA.com | Made in China
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please
visit PowerA.com/Support.
WARRANTY
2-Year Limited Warranty: Visit PowerA.com/Support
for details.
AUSTRALIAN WARRANTY STATEMENT
This product comes with guarantees that cannot be
excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure. If purchased
within Australia or New Zealand, this product comes with
a one-year warranty from date of purchase. Defects in the
product must have appeared within one year from date
of purchase, in order to claim the warranty. All warranty
claims must be facilitated back through the retailer of
purchase in accordance with the retailer's return policies
and procedures. Any expenses incurred, as a result of
returning the product to the retailer of purchase are the full
responsibility of the consumer.
AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street South Yarra, Australia VIC 3141
bluemouth.com.au | Email: support@bluemouth.com.au
+61 (3) 9867 2666
ADDITIONAL LEGAL
© 2021 ACCO Brands USA LLC. PowerA and PowerA
Logo are trademarks of ACCO Brands Corporation.
"1", "PlayStation", "PS4", and "DUALSHOCK" are
registered trademarks or trademarks of Sony Interactive
Entertainment Inc. All rights reserved. All other trademarks
are the property of their respective owners. Manufactured
and distributed under license by Sony Interactive
Entertainment LLC.
REGIONAL COMPLIANCE SYMBOLS
More information available via web-search of each symbol
name.
Customer Service
Service client
Kundendienst
Servicio a clientes
Assistenza clienti
Apoio ao Cliente
TWO-YEAR LIMITED WARRANTY
For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.
Beschränkte 2-Jahre-Garantie Informationen zur Garantie oder Unterstützung zu Ihrem PowerA-Originalzubehör finden Sie unter PowerA.com/Support.
Garantía limitada de dos años Si quieres más información sobre la garantía o necesitas ayuda con tus accesorios originales de PowerA, visita
PowerA.com/Support.
Garantie limitée de deux ans Pour plus de détails sur la garantie ou pour obtenir une assistance pour vos accessoires PowerA d'origine, veuillez
consulter le site PowerA.com/Support.
Garanzia limitata di due anni Per i dettagli sulla garanzia o per richiedere assistenza per i tuoi accessori PowerA autentici, visita la pagina
PowerA.com/Support.
Garantia limitada de dois anos Para mais informações sobre a garantia ou os acessórios originais da PowerA, visita PowerA.com/Support.
3
(EU, UK, and Turkey Only) The WEEE (Waste
of electrical and electronic equipment) symbol
requires battery disposal outside of other
household waste per local regulations. Contact
your city office, waste disposal service, or
retailer for guidance.
(EU and Turkey Only) The CE (Conformité
Européene aka European Conformity) mark is
a declaration from the manufacturer that the
product meets applicable European Directives
and Regulations for health, safety, and
environmental protection.
(UK Only) The UKCA (UK Conformity
Assessment) mark is a declaration from
the manufacturer that the product meets
applicable UK Regulations for health, safety, and
environmental protection.
(Australia only) The Regulatory Compliance
Mark is a visible indication of a product's
compliance with all applicable ACMA (Australian
Communications and Media Authority)
regulatory arrangements, including all technical
and record-keeping requirements regarding
the electrical safety and/or electromagnetic
compatibility (EMC).
DECLARATION OF CONFORMITY
Hereby, ACCO Brands USA LLC at 4 Corporate Way, Lake
Zurich, IL 60047 USA, declares that this wired charger
is in compliance with Directive 2014/30/EU. The full text
of the EU Declaration of Conformity is available at the
following internet address: PowerA.com/compliance
FRANÇAIS
CONTENU
(1) Station de charge
(1) Adaptateur de charge USB
UTILISATION
1. Connectez l'adaptateur de charge USB sur l'entrée Micro
B de votre manette de jeu sans fil DUALSHOCK®4.
2. Connectez la station de charge sur l'entrée USB de votre
PlayStation®4 ou sur toute autre entrée USB alimentée
en branchant le connecteur USB dans une entrée USB
alimentée.
3. Placez votre manette de jeu sans fil DUALSHOCK®4 sur
la station de charge et appuyez dessus. La manette de
jeu sans fil DUALSHOCK®4 s'allumera en orange pour in-
diquer l'état de la charge. Une fois complètement chargé,
l'indicateur du la manette de jeu sans fil DUALSHOCK®4
s'éteindra pour indiquer que la charge est terminée.
PowerA.com/Support
Model: 1346333-02
Press down to Charge
DÉPANNAGE
Q1. La station de charge est connectée à ma
PlayStation®4, mais elle ne se charge pas.
R1. Assurez-vous que votre PlayStation®4 est en mode
« repos » ou en état de « MARCHE ». Les entrées USB de
la PlayStation®4 sont inactives quand cette dernière est
à l'« ARRÊT ».
Q2. Mon manette de jeu sans fil DUALSHOCK®4 se
charge, mais sans être allumé en orange ?
R2. Si votre manette de jeu sans fil DUALSHOCK®4 est
toujours apparié à la PlayStation®4 pendant la charge, il
restera allumé avec la couleur de votre « Canal ».
Q3. Comment puis-je vérifier l'état de la charge de
mon manette de jeu sans fil DUALSHOCK®4 ?
R3. Vous devez apparier la manette de jeu sans fil
DUALSHOCK®4 à la PlayStation®4 et vérifier le témoin à
l'écran sur l'état de la charge de la batterie.
CAN ICES-3(B)/NMB-3(B)
L'émetteur/récepteur exempt de licence contenu dans
le présent appareil est conforme aux CNR d'Innovation,
Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
FABRIQUÉ PAR
ACCO Brands USA LLC, 4 Corporate Way, Lake Zurich, IL 60047
ACCOBRANDS.com | POWERA.com
FABRIQUÉ EN CHINE
SERVICE CLIENTÈLE
Pour obtenir une assistance pour vos accessoires
PowerA d'origine, veuillez consulter la rubrique
PowerA.com/Support.
GARANTIE
Garantie limitée de deux ans. Consultez le site
PowerA.com/Support pour plus de détails.
INFORMATIONS LÉGALES SUPPLÉMENTAIRES
© 2021 ACCO Brands USA LLC. PowerA et le logo PowerA
sont des marques commerciales d'ACCO Brands Corporation.
«1», «PlayStation», «PS4», et «DUALSHOCK» sont des
marques déposées ou des marques commerciales de Sony
Interactive Entertainment Inc. Tous droits réservés. Toutes
les autres marques sont la propriété de leurs propriétaires
respectifs. Fabriqué et distribué sous licence par Sony
Interactive Entertainment LLC.