Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMED PLAY (CD/USB/MP3)
Programmed play is that tracks on the disc or on the USB can be edited for playback in a preferred
order with the use of PROGRAM button.
In stop mode, press MODE/PROG button once, the program sequence indication "P01" flashes several
times with "PROG." icon in the LCD first. Then a flickering track number shows on the LCD with
"PROG." waiting for your input, select the first track to be programmed using NEXT/PREV buttons or
+10 button, and press MODE/PROG button again to store and advance to the next programming step.
The program sequence indication changes to "P02" waiting for your next input. Once the memory is full,
"FUL" will show on the screen.
Repeat the steps above to program more tracks. A maximum of 20 tracks for CD and 99 tracks for
USB&MP3 can be programmed in memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order after you are done with
programming.
You may press STOP button to terminate programmed playback. In program stop mode, press STOP
button again to clear the programming; press PLAY/PAUSE button to begin the programmed playback
with the programming order identical with the previous one done.
REPEAT A SINGLE TRACK (CD/USB/MP3)
To repeat a preferred track in playback, press MODE/PROG button once, the corresponding icon of
repeat a single track shows in the LCD. Then select the preferred track using NEXT/PREV buttons or
+10 button. The player will repeat the chosen track until you press STOP button.
REPEAT ALL TRACKS (CD/USB/MP3)
To repeat all tracks, press MODE/PROG button twice in play mode, the corresponding icon of repeat all
tracks shows in the LCD. The player will repeat all tracks until you press STOP button.
INTRODUCTION PLAY (CD/USB/MP3)
Introduction play is that the first ten seconds of each track are played in a sequential order. Press
MODE/PROG button three times to enter this mode during play, the icon of introduction play shows in
the LCD. Press NEXT/FAST FORWARD button in Introduction mode to begin Introduction play from the
next track immediately after the current track. Press PREV/FAST BACKWARD button in Introduction
mode to begin Introduction play from the current track again. Press STOP button to exit the introduction
play mode and press PLAY/PAUSE button to resume normal play from the first track.
RANDOM PLAY (CD/USB/MP3)
Random play is that tracks on the disc/USB are played by the player at random. Press MODE button
four times to enter this mode during play, the icon of random play shows in the LCD. Tracks on the
disc/USB will be selected at random for playback and the player stops automatically after all tracks are
played. You may press STOP button to exit random play mode and press PLAY/PAUSE button to
resume normal playback.
AUX IN
Your player can be used as a power amplifier to playback the programs from portable radio, TV set or
MP3 player or whatever provided this appliance is so designed that audio signal may be produced
through a LINE-OUT jack or the like.
Observe the following steps to connect the player to another appliance:
1. Power the player on using the supplied AC Power Cord.
2. Slide Function Switch to CD position.
3. Connect the appliance into the player's AUX IN jack with the LINE OUT cable of the appliance.
4. Power on the appliance and begin play.
GB-4
Publicidad
