Publicidad
Quick connection of the device:
1. Download the Client
Search for "Aqara Home" in the Apple App Store, Google
Play, Xiaomi GetApps, Huawei App Gallery, or scan the
following QR code to download the Aqara Home app.
2. Power on the device:
Please turn on the power supply of the Chime Repeater
first, and install the battery into the Doorbell Main Module
after the Chime Repeater is successfully added to the APP.
At the same time, pay attention to the following points:
*The Doorbell Main Module and Chime Repeater have been paired
before leaving the factory, and the user cannot untie them, so they
cannot be used with other doorbells.
*Just connect the Chime Repeater to the network, and the Doorbell
Main Module will automatically connect to the Chime Repeater after
the Chime Repeater connects to the network.
*After the Chime Repeater is powered on and started for 10 minutes, the
network connection is still not performed, then the device will enter
the stop state where the white light is always on. If you want to
perform the network connection again, please unplug the power
supply and plug it in again, or press the function buttom for 10 seconds
to reset the network. When the indicator light changes to the flashing
yellow light, you can access the network again.
3. Add doorbell
Add the Doorbell to Aqara Home App
Hold your mobile device close to the repeater,open Aqara
Home app, click "+"on the top right corner of the home
page, select "Smart Video Doorbell G4", and follow the
instructions of the app. After successful connection, the
Chime Repeater status indicator will be a solid blue light.
If the Chime Repeater binding fails, please confirm whether
the following reasons exist:
-01-
Publicidad
