BGS technic 70952 Instrucciones De Uso página 4

USE
1. Disconnect the negative terminal of the battery and remove it from the battery.
2. Remove the cables of the starter motor.
3. Loosen the starter mounting bolts and remove the starter.
4. Insert the tool as shown.
5. When inserting ensure that the teeth of the tool engage with the teeth of the flywheel, the tool
is correctly aligned and the screw connections of the tool are tight.
NOTE
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed