Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING GUIDE
ISSUE
Over Voltage
Under Voltage
Short Circuit or Over Current
Over Temperature
Ground Fault or Residual
Current
Surge Current
Pilot Signal
Connector plugged into vehicle
during start up
All Others
USER MAINTENANCE INSTRUCTIONS
1)
Keep the charger clean and keep the charge in a clean area.
2)
Avoid moisture or water in the charger. If there is water or moisture ingress into the
charger, shut off power immediately to avoid danger, and notify the professional electrician
to carry out maintenance before next use.
3)
If there is any damage to the vehicle connector, charging cable, or vehicle connector
holder, please contact the maintenance personnel immediately.
4)
Use the charger properly. Do not hit or press hard on the case. If the case is damaged,
please contact a professional electrician.
5)
Avoid placing the charger near hot objects and at high temperature locations and away
from dangerous substances such as flammable gases and corrosive materials.
6)
Do not place external objects or heavy objects on the charger to avoid danger.
7)
Avoid leaving cable on the ground
LOGO INDICATOR
RED
FAST BLINKING RED
SLOW BLINKING AMBER
BLINKING AMBER/RED
AMBER
N/A
OFF
BLINKING BLUE SQUARE
SLOW BLINKING RED
www.breez-EV.com 847-380-3540
sales@led-llc.com
REMEDY
1.
Remove connector
from vehicle and turn
off power
2.
Wait at least one
minute
3.
Turn power back on, if
problem persists
contact qualified
electrician
9
Publicidad
