AnkerWork H300 Manual Del Usuario página 4

MULTIPOINT CONNECTION
AnkerWork H300
Mono Headset
The headset can connect to two devices at the same time.
To pair with a second device, slide the power switch to the Bluetooth
position and hold for 2 seconds until the LED indicator flashes blue.
AUX
WIRED MODE
Use the headset by plugging in the USB cable. Wired mode will
automatically turn off Bluetooth mode.
CONTROLS
Volume up
Previous track
Play / pause
Volume down
Next track
PAIRING
CONNECTED
Press once
Press and hold for 2 seconds
Press once
Press once
Press and hold for 2 seconds
Note:
• When available to both connected devices, the headset will automatically
switch to the device that is playing music or taking a call.
• When listening to music on one device, you have to stop the current
playback first to play music on another device.
• When playing music or during a call on one device, you can answer or
reject an incoming call from another device.
MUTE
1
There are two ways to mute your headset: by pressing the mute button
or by lifting the mic boom.
Lowering the mic boom all the way down can unmute your headset or
answer an incoming call.
Mute / unmute microphone
Busy light on / off
Activate voice assistant software Press and hold for 2 seconds
Answer / end a call
Reject a call
EN 02
2
Press once
Press twice
Press once
Press and hold for 2 seconds