ALARM 1, ALARM 2
To turn on the timer
1
After setting the timer, press the
ALARM 1 or ALARM 2 button to turn
the timer on.
The Timer indicator (
on the display.
2
Prepare the source.
When the source is set to "iPod", insert
an iPod.
When the source is set to "FM" or
"AM", tune in a station.
When the source is set to "AUX", start
playback on an audio device connected
to the AUX IN jack.
< Playback volume will gradually increase
up to your set volume when the unit is
turned on by timer.
< If the source is set to "iPod" but no iPod
is set, the buzzer will sound.
< When the source is set to "FM" or "AM"
and the unit turns on, it will tune in to
the station you selected last time.
< To turn off the buzzer, press the ALARM
1 or ALARM 2 button.
To turn off the timer
How to use the snooze function
or
) appears
< During timer playback and snoozing, all
When you don't use the timer, press the
ALARM 1 or ALARM 2 button to turn it
off.
The Timer indicator (
disappears from the display.
Press the ALARM 1 or ALARM 2 button
again to turn it on.
After the ON time is reached, press the
SNOOZE button and the unit will turn off
for 10 minutes then turn on again.
You can use this function repeatedly for
up to 2 hours.
the function cannot work except the
following buttons:
SNOOZE, STANDBY/ON
or
)
21