Lacor DUPLOAIR Instrucciones De Uso Y Mantenimiento página 46

Clean the fryer after each use. Follow the instructions below.
1.- Before starting to clean the fryer unplug it and wait for it to cool down completely.
2.- Clean the body of the fryer with a damp cloth and dry it off. The body of the fryer cannot be
submerged.
3.- Clean the pans and baskets with soap and water. Please note that the body of the fryer
should not be immersed in water for cleaning.
4.- Dry all the parts and reassemble them on the fryer.
5.- Store the fryer in a cool well ventilated place.
TABLE OF ERRORS AND SOLUTIONS
MISTAKE
E1 y E2 Temperature sensor is not working
properly.
E3 Temperature in the fryer does not
increase after 3 minutes.
E4 Resistor temperature is too high.
E5 Defective power panel.
E6 Defective control panel.
E7 Fault in a protection fuse.
46
CLEANING / MAINTENANCE
REASON SOLUTION
Temperature sensor is not working
properly.
Temperature sensor is not correctly
connected or needs replacing.
Please contact the technical
service.
Temperature sensor is not working
properly.
Resistor is not working properly.
Please contact the technical
service.
Temperature sensor is not working
properly.
Please contact the technical service.
Please contact the technical
service to replace the panel.
Control panel is not correctly connected.
Control panel is damaged.
Please contact the technical service.
Please contact the technical
service.