Descargar Imprimir esta página

Westinghouse ePX3100V Manual Del Usuario página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRICAL
DOUBLE INSULATION
Double insulation eliminates the need for a three-wire
grounded power cord. Double insulated products do
not need to be grounded because exposed metal parts
are covered in protective insulation that isolates them
from internal metal motor components.
WARNING
is designed to protect against shock caused by a
break in the product's internal insulation. To avoid
electric shock, follow all ordinary safety procedures.
NOTE: Double insulated products should only be
serviced by qualified service technicians. For more
information, contact Westinghouse customer service
toll-free at 1 (855) 944-3571.
AC MOTOR
The electric motor in this product was designed to
work with a nominal 120V/60Hz AC power supply
(average U.S. household circuit). It is not intended
to operate on direct current (DC). A significant voltage
drop will result in a loss of power and could damage
the motor.
GROUND FAULT CIRCUIT INTERRUPTER
PROTECTION
See Figure 1.
This pressure washer has a ground-fault
interrupter (GFCI) built into the plug of the power-supply
cord. A GFCI protects against ground fault currents such
as a current that would flow through a person standing
on a wet surface while holding a product with faulty
insulation. GFCI plugs do not protect against shocks,
short circuits, and overloads. If replacement of the plug
or cord is necessary, use identical replacement parts
that include GFCI protection.
8 | English
A double insulated system
To test the GFCI:
l Plug the power supply cord into a receptacle.
l Press the TEST button and listen for a "click" indicating
that the connection to the power supply was broken.
l Press the RESET button to restore power to the device.
The LED light will turn on when power is restored.
Test the GFCI monthly to ensure proper operation.
FIG. 1
A
circuit-
A - TEST Button
B - RESET Button
B

Publicidad

loading