Publicidad
Idiomas disponibles
Idiomas disponibles
Using as a handheld vacuum cleaner
If the tube is not required, the
floor brush can be attached di-
rectly for cleaning hard-to-reach
areas such as stairs. Push until it
clicks into place.
Wall mounting
Please make sure there is no gas, water or electrical cables and wires behind
the mounting area.
Top screw hole of
wall bracket
26
You can attach the 2-in-1 crevice
tool/dusting brush to clean nar-
row edges and corners, etc.
1. Locate a free space on a wall which
is close to a plug socket.
2. Measure 105 cm ~ 125 cm above the
floor and mark the wall with a pencil.
3. Hold the wall bracket with the top
screw hole at the pencil mark. Mark
the positions of two screw holes
through the wall bracket.
4. Drill two holes into the wall and in-
sert the supplied wall plugs.
5. Securely fix the wall bracket to the
wall using the supplied screws.
6. Hang your vacuum cleaner on the
wall bracket.
CLEANING AND MAINTENANCE
Important !
Turn off the appliance before cleaning and carrying out any
maintenance work.
In order to maintain appliance performance, it is recommended that
you clean all parts of your appliance periodically.
• Disassemble the parts.
• Wipe the surfaces of the appliance with a slightly damp cloth.
Never clean with chemical or abrasive cleaners.
• Do not immerse the appliance in water or any other liquid.
• To clean the floor brush, use scissors to remove hair and debris
from the brush head.
Emptying the Dust Cup and Cleaning the Filter Assembly
Empty the dust cup when debris reaches the MAX fill line.
1. Press the dust cup release button to remove the dust cup from
the main body.
MAX line
2. Lift to remove the cyclone filter assembly and empty the dust
cup.
Dust cup release button
27
Publicidad
