Select AUTO UPDATE to set whether the time is to be set automatically
using the DAB reception (UPDATE FROM DAB), automatically using the FM
reception (UPDATE FROM FM), automatically via the network (UPDATE FROM
NETWORK) or not updated (NO UPDATE). Press OK to confirm.
Under SET FORMAT, set whether to display the time in 12- or 24-hour format.
Press OK to confirm.
Select your time zone under SET TIMEZONE. Press OK to confirm.
Under DAYLIGHT SAVINGS, configure the automatic setting for summer/
winter time to ON or OFF. Press OK to confirm.
25.5. Setting the language
You can set the menu language under LANGUAGE.
25.6. Resetting the device to factory settings
If the internet radio stops responding to inputs, or there are problems with the
network connection, it may be necessary to reset the device to factory settings.
If your device stops responding, disconnect the mains adapter from the socket
and then reinsert it after a few seconds.
Then reset the menu settings to factory settings by calling up the menu
SYSTEM SETTINGS -> FACTORY RESET and then pressing YES to confirm the
subsequent prompt.
The installation process must then be carried out again.
Please note that all settings, such as the network key, are irretrievably
lost when the device is reset and must be re-entered when the device is
restarted. Stored stations are also deleted.
25.7. Updating the software
You can search for and, if applicable, install software updates under SOFTWARE
UPDATE.
25.7.1. Performing automatic updates
Under AUTOCHECK SETTING, select YES to automatically search for software
updates at regular intervals. If an update is found, you will be informed and can
confirm the update by pressing OK.
If security-related updates are necessary, we will supply them to you as
quickly as possible.
25.7.2. Searching for software updates
Select CHECK NOW to start searching for software updates immediately.
DE
FR
NL
ES
IT
EN
371