Beta 1697 Manual De Instrucciones página 6

EN I
INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
KEY TO SYMBOLS
Keys
1 - On/Off button
2 - Laser light projector
3 - 1/4" inlet
USE
Place the level on a flat, horizontal surface and set the on/off button to ON, to release the self-levelling pendulum
mechanism.
The working level will emit two laser light beams (one vertical and one horizontal).
If the level is tilted sideways to an angle exceeding 4° (maximum compensation angle of pendulum),
the laser beam will be disabled.
After use, reset the on/off button to OFF, to turn off the laser and lock the pendulum.
Check that the on/off button is always on OFF during transportation. This will prevent the oscillating
system from getting damaged.
If the batteries are flat, the device will go out.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta
Utensili S.P.A.'s repair centre.
DISPOSAL
The crossed-out wheelie bin symol on the equipment or packaging means that the product should be collected
separately from other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of a product for professional use only, contact the manufacturer which will arrange for the product to be
properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the
environment and human health. Illegal disposal of this product is a violation of the provision concerning the disposal
of hazardous waste and will give way to the application of such fines as provided for under current regulations.
WARRANTY
This lamp is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month
warranty for professional use or a 24-month warranty for nonprofessional use.
6