Publicidad
Idiomas disponibles
Idiomas disponibles
3. Empty the water from the Kettle. Once cooled, rinse Kettle with
water.
4. Repeat process at least 2 times to ensure your Kettle is clean before
use.
Attention: First use may cause a slight odor or small smoking upon heating,
it is normal. This is a result of the heating element chemical reaction. It
quickly goes away.
Using Your Kettle:
1. Pull out the power cord from the base unit and connect it to a power
outlet.
2. Remove kettle from power base then open the lid to fill Kettle with
water.
CAUTION: Do not overfill the product or operate it when empty.
3. Close the lid. Wipe off any excess water on the bottom of the kettle
before placing it onto the base. Place the Kettle back onto the base
unit.
4. Turn the Kettle on by pushing the switch from "O" (off) to "I" (on). The
light on the Power Base will illuminate to indicate the Kettle is heating.
5. The Kettle will automatically switch off to the "O" position once the
water has boiled. The indicator light will also turn off.
Note: The power switch only works when the Kettle body is correctly placed
on power base.
6. Lift the Kettle from the base using its handle and pour out hot water
into your container.
Note: If you need to heat water again, let the appliance rest for 1 minute
before starting again.
7. When heating is complete, make sure the power switch is on the "O"
position, and then unplug the product from the electrical outlet.
Note: Always unplug the product from the electrical outlet when it is not in
use or unattended.
Cleaning Your Kettle:
WARNING: Always unplug the product and allow it to cool completely
before cleaning or storing it.
6
Publicidad
