Publicidad
Idiomas disponibles
Idiomas disponibles
SV 1010
IMPORTANT SAFETY PRECAUTIONS
Check that the voltage rating on the product's nameplate matches the mains supply voltage. Choose within
the range between 120 V and 230 V by turning the "voltage selector" switch. Before plugging the iron into
the mains, check that the "voltage selector" switch is in the right position.. Please remember that if the
switch is in the wrong setting, it may cause a failure or the required temperature may not be reached.
How to use the foldable handle lock:
When you want to fold the handle, please press the lock down; if
you want open the foldable handle, please pull up the handle
without touching the lock.
FILLING WATER
1. Before filling water, please pull out the plug first.
2. Set the steam control to the minimum position.
3. Pull down the cover of water filling mouth, and then fill water.
SPRAYING
Press the spraying button, steam will be sprayed out from the spraying nozzle. At that time, you should
keep enough water in the water tank.
STEAM IRONING
1. To use steam ironing turn the temperature control at the "o.", "oo" or "ooo" position.
2. After the indicator goes out, press the Steam burst button and the steam will be sprayed.
DRY IRONING
Turn the steam control to the selected position and without pushing the Steam burst button, start dry
ironing.
A. Voltage selector
B. Spraying button
C. Steamburst button
D. Water filling cap
E. Spraying mouth
F. Power cord protection
G. Temperature control
H. Light indicator
I. Foldable Handle lock
J. Non-stick base plate
10
Publicidad
