VITO PRO-POWER VIMSFL4 Manual De Instrucciones página 30

FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING
Question/ Problem – Cause
Causa
The engine doesn't start:
• Discharged battery;
• Switch contacts are not in good condition or the
switch does not work;
• Windings of the rotor or the stator damaged;
• Windings of the rotor in short circuit;
The engine makes an abnormal sound, starts
intermittently or turns slowly:
• Switch connections are damaged;
• Mechanical obstruction;
• The multi-tool is running over excessive pressure,
motor in overload;
The machine overheats:
• Machine overloaded;
• Incorrect housing or parts assembly inside the
electrical tool;
• Power supply too low;
30
All manuals and user guides at all-guides.com
Solution
• Charge;
• Repair or replace the switch;
• Contact technical assistance;
• Contact technical assistance;
• Repair or replace the switch;
• Inspect the mechanical parts;
• Reduce the pressure exerted;
• Reduce working pressure;
• Check if there is any blockage or part touching the
rotor;
• Check the power voltage and adjust according to
the technical specifications;