Publicidad
EN
This manual contains important information that should be kept
for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Material
Oak veneered particleboard.
Doors: solid oak.
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where it will
be installed.
Assemble on a clean, flat surface.
Over time, the fasteners may lose their effectiveness. Periodically
check for loose screws. Retighten if necessary.
Warning! Before drilling, make sure that no pipes or cables will
be present in the drilling area. Fix the product to the wall to
ensure its stability. Use the type of screws and wall plugs for the
supporting material.
With time, the bindings can lose their effectiveness. Regularly
check the tightening of screws. If necessary tighten.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.wc
Do not sit on the product.
The wood-based products, particle board, painted, varnished and /
or lacquers may emit an odor when opened. This smell disappears
after a few weeks if the room is properly ventilated.
Maintenance
Remove dust regularly with a dry cloth.
Clean with a soft, damp cloth. Then wipe with a clean dry cloth.
Mop up spills immediately with a clean, dry cloth.
In order not to damage the surface, it is recommended not to file a
hot object or wet directly.
Do not use magazines or newspapers as a mat. The ink used may
leave traces that can stain permanently the furniture
surface.
To avoid the appearance of marks, not to leave any stationary
object for more than two months.
To avoid scratches, do not use a sponge or recurrent grain cleaner.
Do not use abrasives.
Maintain with movements in the direction of wood fiber.
Do not place the product near a heat source (radiator, fireplace ...)
nor a moisture source. Heat and humidity may damage
the product.
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this
product, assembly instructions or service received, please
enquire at your nearest store or contact us on our website at:
www.habitat-design.com or write to this address: HABITAT,
70 AVENUE VICTOR HUGO, 93300 AUBERVILLIERS FRANCE.
Max II - 10/2022
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2
Publicidad
