Tabla de contenido
Publicidad
4. Maintenance
No routine or extraordinary maintenance is necessary apart from periodically cleaning the unit as described in this manual.
In compliance with the product guarantee law, repairs to our units must be carried out in our factory, unless previously
agreed otherwise with local distributors.
The instrument must be transported in its original packaging and any indications present on the original packaging must be
followed (e.g. palletized).
It is the responsibility of the user, to properly decontaminate the unit in case of hazardous substances remaining on the
surface or interior of the device. If in doubt about the compatibility of a cleaning or decontamination product, contact the
manufacturer or distributor.
4.1 Cleaning
Disconnect the unit from the power supply and use a cloth dampened with an non-inflammable non-aggressive detergent.
5. Technical data
Power supply
Dimensions WxHxD
Weight
Power input
Motor rating output
Dimension of the heating plate
Programmable temperature range
Type of temperature control
Overtemperature protection
Stirring capacity
Programmable speed range
Type of motor control
Connection
Electric rating for external probe
Accuracy of temperature with VTF
Accuracy of temperature with external probe
Noise level
Temperature range / Storage temperature range
Max humidity
Level of electrical protection CEI EN60529
Overvoltage category
Pollution degree CEI EN61010-1
Max altitude
* in the following conditions: 800ml water in 1 liter glass beaker (diameter 105mm), stirring bar 10x40mm, 600rpm, 50°C.
230V / 50-60Hz or 115V / 60Hz
203x93.5x344 mm (8x3.68x13.5 in)
3.5 Kg (7.7 lbs)
800 W
10 W
180 x 180 mm
5 – 550 °C
Digital
Yes
15 liters of H
O
2
50 – 1500 rpm
Electronic
VTF - External probe Pt100
5 Vdc – 1W (max)
+/-0,5°C*
+/-1°C*
<< 80 dBa
+5...+40 °C / -10...+60 °C
80%
IP 42
II
2
4000 m
9
Publicidad
Tabla de contenido
