Electrical Safety - Greencut BAS130C Manual De Instrucciones

38

ELECTRICAL SAFETY

• Before starting up the appliance, check that: the earthing, the neutral connection and the differential protection
device comply with the safety regulations of the energy supply companies and function perfectly.
• Whenever possible, use a residual current device (RCD).
• Keep electrical outlets away from excessive moisture and water.
• In case of risk of flooding, connect the plugs in a place protected against flooding.
• In case the pump is connected to the outside it is important that the conductor cable is also for outdoor use.
• Avoid unintentional start-up of the equipment. Make sure the switches are in the OFF position before connecting
or moving the product.
• Do not use equipment with exposed cables or damaged switches.
• Do not use electrical cords to lift, move, or transport equipment.
• Make sure that the electrical cables do not present a risk of tripping.
MACHINE CARE, TRANSPORT AND STORAGE
• Do not modify product controls.
• Check regularly for broken parts or other conditions that may affect the proper operation of the machine. Keep
the pump, electrical wiring and hoses in good working order.
• Replace worn or damaged parts immediately with original spare parts only.
• Carry out regular maintenance on the machine. Do not attempt any maintenance or repair work not described
in this instruction manual. We recommend that maintenance and repairs not described in this manual are carried
out by the Official Technical Service.
• At the end of the work, always clean the machine.
• The equipment is not weather resistant, and should not be stored in direct sunlight, high ambient temperatures,
or in humid or wet locations.
• Store the product out of the reach of children.
SERVICE
• Have the product checked periodically by a qualified technician and use only original spare parts. If you have any
questions, please contact the Official Technical Service.