Descargar Imprimir esta página

BRAUN Photo Technik ScoutingCam BLACK200A Mini Manual De Instrucciones página 41

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Caution
♦ Ensure that there are no electric lines, water or heating pipes
installed at the proposed drilling location.
♦ The supplied wall plugs are only suitable for mounting on
concrete or stone. Before starting the installation, please check
your installation location carefully for its suitability for the plugs.
The assembly material used must be suitable for the respective
location. If in doubt, consult a professional.
Installation Steps
♦ Mark the drill holes by holding the foot of the wall bracket at
the desired mounting location and marking the hole positions.
♦ Use a drill with a 6 mm drill bit to drill the required holes and
insert the plugs and insert the wall plugs flush with the wall.
♦ Screw the wall bracket to the wall using the supplied screws .
♦ Mount the camera on the tripod screw and screw the camera
a little way on (about three turns).
♦ Turn the camera in the desired direction and lock it with the
lock nut .
♦ To move the camera into its final position, undo the two pivot
bolts a little, position the camera and fix the position by
tightening the two pivot bolts .
15

Publicidad

loading