Publicidad
Idiomas disponibles
Idiomas disponibles
6.1.2. Inspections and maintenance
Always keep the saw clean. It is enough to remove the dust with a cloth or a brush by the saw
at the end of the work. Always clean it with the saw stopped and the motor disconnected from
the mains. Dust and sawdust on the cooling plates can cause the motor to overheat. Clean
them frequently.
6.2. Inspection and maintenance program
Time interval
after each use
when necessary
6.3. Transport and storage
For a prolonged stop, it is recommended to clean the saw and the cradle spring with a cloth
soaked in oil to prevent rust. Cover the machine with a tarp if it is outdoors or in unprotected
places. The motor and the switch must be protected mainly against water and humidity.
Before transporting, disconnect the saw from the electricity.
Push the rocker toward the saw and secure with latch D (Fig. 4). Once you have moved the
saw, hold the machine stand with both hands, place one of your legs on the axis of the
machine, and tilt the machine slightly toward you. In this position, you can easily transport the
saw.
7. WARRANTY
Millasur guarantees that if your product suffers from a manufacturing defect during the
established guarantee period, contact or go to your point of sale.
Your purchase invoice must be kept as proof of the purchase date. Your tool must be returned
to your dealer in an acceptable and clean condition, in its original molded case, if applicable to
the unit, accompanied by your appropriate proof of purchase.
Description
Remove sawdust, dust and dirt from the saw. Clean the machine.
Sharpen the saw. Replace it if necessary.
14
EN
Publicidad
