Mistral SUP MSP 12 A1 Traducción Del Manual De Instrucciones Original página 46

Mini-Boston valve adapter
The mini-Boston valve adapter can be used to
inflate small inflatable mattresses .
Boston valve adapter
The Boston valve adapter can be used to inflate
various inflatable mattresses .
Changing the fuse
The 12 V vehicle connector plug
fuse . If the appliance is not working, the fuse may
be defective . Exchange the defective fuse for a
replacement fuse of the same type (see also
section Technical data) .
♦ To do this, pull the 12 V vehicle connector plug
out of the cigarette lighter socket .
♦ Open the 12 V vehicle connector plug
carefully unscrewing the grooved screw insert
(C) anticlockwise (using pliers if necessary) and
removing it .
♦ Now, remove the plug tip (B) from the fuse (A),
remove the fuse (A) and place it to one side .
♦ Now insert a new 15 A fuse into the 12 V
vehicle connector plug
(B) onto the slightly protruding end of the fuse
and screw the previously removed screw insert
(C) back in .
NOTE
► If the appliance still does not work or the fuse
blows again immediately, the appliance is
defective . Please contact the Service Hotline
(see section Service) .
MSP 12 A1
contains a
by
, place the plug tip
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and unplug the
12 V vehicle connector plug before
starting
any work on the appliance.
■
Do not use any sharp objects to clean the
appliance. Do not allow any liquids to get
into the appliance. Otherwise, the appliance
could be damaged .
■ The appliance is maintenance-free .
■ Clean the appliance regularly, preferably imme-
diately after use .
■ Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners that can attack the
plastic .
■ Never obstruct the ventilation openings .
NOTE
► You can order replacement parts that are not
listed (such as adapter nozzles, switches)
via our Service Hotline .
► This appliance is maintenance free . Never
open the appliance . The appliance may only
be repaired by an authorised service centre
or Customer Service . If one of the faults listed
below occurs, note the following:
♦ Allow the appliance to cool down and wait a
short while for the residual energy to neutralise .
♦ Ensure that the appliance is in good working
condition .
GB │ MT │ 43 ■