LOKMAT Time 2 Manual Del Usuario página 4

Please check if you have the following items:
1. Smart watch
2. Magnetic charging cable
3. Operation Guide
Set up the watch
TIME 2 is used in Android 5.1 and iOS 9.0 or above. You can download and install FitCouldPro first through the
following QR code.
Watch Charging
Operation Introduction
1) Swipe the screen to the left：enter the function options, exercise data, body temperature, exercise, heart
rate, sleep, blood pressure, blood oxygen, weather, music.
2）Swipe the screen right：Enter function options, enter split screen mode.
3） Slide Down Screen： Optional: brightness adjustment, do not disturb mode, search phone, system, settings。
4）Swipe Up Screen：Display information content.
Key Function
1) The upper button is the encoder function.
2) The button below is the switch button.
Bluetooth connection operation steps
1. Download and open the FitCloudPro APP, search for the Bluetooth device "TIME 2".
2. Bluetooth call: open the Bluetooth option of the mobile phone and search for "TIME 2-LE".
*1
*1
*1
Android:
market to download it.
IOS end:
1) Please charge the watch for 1-2 hours before using this product.
2) Connect the Pogo data cable to the power adapter, and then
charge the watch.
3) It is strictly forbidden to connect the Pogo charging cable to metal
products, otherwise it may cause a fire.
Solution for charging failure：
1) If the connection between the charging cable and the charger is
unstable, please reconnect the data cable and the charger.
2) If you cannot turn on or charge, please use a 5V/2A or higher
charger to charge the device for more than 20 minutes to activate the
battery.
UI interface switching method：
1）Double-click the button on the main menu interface to
switch between different UI interfaces.
2）There are three different UI switching interfaces.
1
Search for FitCloudPro in the "Google Store" app
Search for FitCloudPro in App Store to download.