ab CHORUS CI-5292 Instrucciones De Uso página 7

Operating Information
The Chorus Sound Processor will only operate with
an Advanced Bionics CLARION 1.0 or 1.2 implant. It
will not operate with any other implant type.
Powering the Chorus
The Chorus Sound Processor is turned on when
a charged Chorus Battery is attached. The sound
processor will always power on in program 1, and with
the volume in the middle position. Sensitivity will start in
the position set for program 1 during fitting. The sound
processor can be turned off by removing the battery.
See also "Power on/off" in the User Controls section of
these instructions.
Attaching and Removing the Battery
To attach the Chorus Battery to the sound processor,
slide it onto the Chorus Sound Processor, as shown
below, until the latch on the battery engages with the
sound processor.
Attach
6