Descargar Imprimir esta página

SOMFY HOME ALARM ESSENTIAL Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
User guide
EN
We thank you for your recent purchase of a Somfy
connected alarm. This guide as well as the mobile app
"Somfy Protect" provides you with all the information you
need to install and use it. Before you start the installation,
please read the attached safety instructions carefully.
If you need any additional information concerning this
product, please refer to our FAQ or contact one of our
advisers.
More information on www.somfyprotect.com/support
Install Home Alarm Essential
Download the "Somfy Protect" app,
create your account and follow the
step-by-step installation instructions.
More information on compatible versions
at www.somfyprotect.com/apps.
To meet your needs and all home configurations, some
components of your alarm can be either placed on a
piece of furniture or glued or fixed to the wall.
Select and follow the instructions!
Placed on
a piece of
furniture
Link
Essential
Indoor
siren
Outdoor
siren
Motion
sensor
IntelliTAG®
3M
stickers provided.
(1)
TM
Screws and wall plugs provided for the installation of the outdoor siren.
(2)
Sources of radio interference: electrical switchboard, bundle of wires,
(3)
metallic ground, TV, HiFi, etc.
10
Glued with
Fixed to
adhesive
tape
the wall
(2)
(1)
Place your Link Essential
For optimal radio performance,
place your Link Essential in the
centre of your home, on a non-
metallic piece of furniture at a
height of between 60 cm and 2 m
and at a distance of more than
1 m from all sources of radio
interference
Fix the components to the wall
In the case of a wall installation, we recommend that you
follow the instructions below.
1.
Do not fix any component until you are sure
!
that your Link Essential is connected to Wi-Fi
and communicates effectively via radio with
2.
all accessories.
For products where screws are not
provided, we recommend the use of Ø 3.5 mm countersunk
or flat head screws. Make sure that you always use screws
and plugs suitable for the materials in your wall to avoid
any risk of falling.
Fixing the outdoor siren
Fix in areas that are unobstructed and out of reach
(minimum 2.50 m from the ground recommended).
Fixing the indoor siren
Fix close to the entrance door and protected
leaves, at least 2 m from the floor.
.
(3)
11

Publicidad

loading