DAY Useful Everyday 74592 Manual De Instrucciones página 30

TROUBLESHOOTING
If the machine breaks down,
please wait for the machine to stop
automatically. You can solve the
problem by using the method in the
table below. Do not disassemble,
inspect, or repair the machine without
professional guidance.
This machine has a self-checking
function. If an error occurs, the "ICE
FULL" (H) and the "ADD WATER" (G)
indicators will flicker with red light, and
the ice maker will stop working.
Problem
The machine does not
respond.
"ADD WATER" indicator
(G) red light on.
"ICE FULL" indicator (H)
red light on.
Ice cubes stick together.
Ice cubes smaller than
usual size.
The machine is starting
as normal, but does not
make ice.
Cause
Not powered
There is no power com-
ing to the machine.
The power cord is not
plugged in firmly.
Power cord is damaged.
Lack of water.
Poor induction of the
"ADD WATER" sensor.
Ice basket is full.
Poor induction of "ICE
FULL" (H) sensor.
Ice making environment
temperature or water
temperature is too low.
Ice making environment
temperature or water
temperature is too high.
Refrigeration pipe block-
age.
Refrigerant leak.
30
Solution
Check the power supply.
Check the power con-
nection.
Check the power cord for
damage.
Call authorized techni-
cian repair.
Please add water and
restart the machine.
Power off for 2 minutes
and restart the machine.
Please take out the ice
cubes from the ice stor-
age basket.
Clean the induction
probe.
Replace the water. Tem-
perature of water recom-
mended at 5°C-30°C.
Replace the water. Tem-
perature of water recom-
mended at 5°C-30°C.
Call authorized techni-
cian repair.
Call authorized techni-
cian repair.