Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING PROCEDURES
UNPACKING YOUR ICE MAKER
1. Remove all exterior and interior packaging. Make sure that ice basket and
ice scoop are included. If any part or accessory is missing, please contact
customer service.
2. Clean the interior with lukewarm water and a soft cloth. Remove the ice
basket and wash it in warm water.
3. Find a location for your ice maker that is protected from direct sunlight
and allows for six inches of space between the back and sides of the ice
maker and the wall.
CONNECTING YOUR ICE MAKER
Improper use of the grounded plug can result in the risk of
electrical shock. If the power cord is damaged, please do not
attempt to use the unit, contact customer service for assistance.
1. This unit should be properly grounded for your safety.
2. Plug the appliance directly into an appropriate 120V AC outlet that is
properly installed and grounded in accordance with all local codes and
ordinances.
USING YOUR ICE MAKER
1. Press the power button a single time after plugging in the ice maker and it
will begin to run.
2. Open the cover, remove the ice basket, and pour water into the tank.
Make sure it does not surpass the maximum water level. Place the ice
basket back into the unit and close the lid.
3. While the ice maker is on, check the water level indicator periodically. If
there is not enough water in the tank to produce ice, the ice maker will
stop automatically, and the "Add Water" indicator will light up. Fill water
up to the "MAX" line, press the power button to enter standby mode and
press the power button again to resume ice production.
4. The ice maker automatically turns off when the ice basket is full and the
"Ice Full" indicator will light up. To restart ice production, remove the ice
www.newair.com
EN
10
Publicidad
