Publicidad
Idiomas disponibles
Idiomas disponibles
8. You can change the selection by pressing the M button Alarm mode (7) button.
9. To exit the clock edit mode, long press the M button Alarm mode (7) button. Or wait 15 seconds.
Alarm Setting:
You can turn on 1 or 2 alarms.
1. To set the alarm time press the M button Alarm mode (7) button once. You will be shown the current 1 alarm setting, short press the M
button Alarm mode (7) button again to change to 2 alarm setting.
2. To edit the alarm time for 1 or 2 alarm first select the alarm you want to change and long press the M button Alarm mode (7) button.
3. You first will edit the Hour, press the Numerical value down (6) or Numerical value up (8) buttons to change the settings, short press the
M button Alarm mode (7) button to confirm.
4. Then you will edit the minutes, press the Numerical value down (6) or Numerical value up (8) buttons to change the settings, short press
the M button Alarm mode (7) button to confirm.
5. Then you will edit the type of buzzer noise. Press the Numerical value down (6) or Numerical value up (8) buttons to change the settings,
short press the M button Alarm mode (7) button to confirm.
6. Then you will change the loudness level of the previously selected ring tone. Press the Numerical value down (6) or Numerical value up
(8) buttons to change the settings, short press the M button Alarm mode (7) button to confirm.
7. You can also choose the "OFF" option. This will turn off the currently edited alarm.
NOTES:
When the alarm is ringing use any button to enter snooze mode, after 2 minutes the alarm will ring again. During snooze mode press the
Snooze / Dimming (9) button twice. The alarm will not ring on the same day again.
When the alarm is ringing and you don't press any button it will stop after 1 minute and then start back again after 2 more minutes. It will do
so 3 times. After that the alarm will no longer ring on the same day.
Troubleshooting:
Problem: Device can't connect to Bluetooth.
Solution:
1.Check if the product is not connected to another device. Disconnect the current device and reconnect the new.
2. The device has less than 20% battery charge. Charge the device.
Problem: Unable to charge.
Solution: Check the charging cable.
Problem: Device not booting / turning on.
Solution: Charge the device.
Problem: No sound during playback.
Solution: Increase volume on device. Increase the volume on phone, playback device.
Problem: Can't find any radio station.
Solution: Plug in the USB cable into the Charging slot (12). Change the placement of the radio closer to a window.
Problem: No SD card playback.
Solution: Check the SD card file format and music file format. The format of the SD card should be FAT32 and music format MP3.
Technical details:
Charging current : 5V 1A
Bluetooth version: 5.0
Battery capacity: 1800 mAh
Speaker Power: 2x 5W
FM frequency Range: 87.5 – 108 MHz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins.
Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the
environment. Do not dispose this appliance in the common waste bin.
5
Publicidad
