Publicidad
Idiomas disponibles
Idiomas disponibles
USE MODE.
Insert the accessory you want in the body, aligning the guides of the two parts and press it a
little while turning it clockwise until you hear a click. To remove, press the lock button and turn
counterclockwise, then pull to remove the accessory.
Advice.
Use the highest speed for thicker sections of hair, and
lower speeds as you need more precision.
1.
Insert the plug into the mains.
2.
When turning on, choose the desired speed. 3. You only need
one hand to use the styler,
hair.
4.
You can use softener or anti-frizz lotions according to your taste.
5.
Take small sections of hair, keep in mind that the larger the amount
difficulty in brushing and drying.
6.
Do not concentrate the airflow at the same point for a long time so as not to damage
the hair.
Warnings.
•
Do not use over the sink or in places close to water.
•
Before storing, let it cool down.
•
Do not wrap cord around styler.
•
During the first few minutes of use, a little smoke and odor may be emitted,this is
normal and will soon go away.
CLEANING AND MAINTENANCE.
1.
Removethemains cable.
2.
Letcool.
3.
Use a damp cloth to clean it.
4.
Do not use corrosive or flammable chemicals to clean it.
5.
Store in a dry place away from sunlight.
6.
Periodically check the filter located at the rear of the brush and clean it so that it
does not affect the air flow.
with the other hand, hold the strand of
greater
Publicidad
