Technoline WT 500 Manual página 13

TO SET TIME, 12/24 FORMAT, SNOOZE DURATION AND WAKE-UP LIGHT
Press SET / MEM to enter time set mode, the time digits 0:00 flash. Press ▲ or ▼ to set the
1.
current time. Press and hold ▲ or ▼ will accelerate setting in faster speed.
Press SET / MEM again, the clock display shows 24Hr and flashes. Then press ▲ or ▼ to select
2.
12Hr or 24Hr. When 12Hr time format is selected, the
to indicate the afternoon time.
Then press SET / MEM again, the clock display shows a flashing 09. Press ▲ or ▼ to set your
3.
desired snooze duration from 5 to 60 minutes.
4. Then press SET / MEM again, the clock display shows
▼ to set the wake-up-light mode:
15 : turns light on and brighter gently 15 minutes before your set alarm time
30 : turns light on and brighter gently 30 minutes before your set alarm time
OFF: turn off the Wake-Up-Light feature
5. Press SET / MEM again to return to normal time display (it will automatically return to normal
time display, if no key is pressed within 8 seconds).
TO SET THE DAILY ALARM 1 & ALARM 2
1. Press ALM 1.2 button once, the LCD display shows
Press ▲ or ▼ to set your desired alarm 1 time. Press and hold ▲ or ▼ will accelerate setting in
2.
faster speed.
3. Press SET / MEM once, it will shows OFF, press SET / MEM once more to select which alarm
type you would like to wake up with:
Wake-by-Buzzer (bu icon appears)
Wake-by-Radio (rd icon appears)
Wake-by-nature sounds (
: Birds
: Forest
: Beach / water front
: Rain and storm
4. Press ALM 1.2 again, the LCD display shows
settings by repeating Step 2 to Step 4 above.
5. Press SET / MEM again to return to normal time display (it will automatically return to normal
time display, if no key is pressed within 8 seconds).
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When the alarm is sounding, press ALM 1.2 to stop the alarm sound and automatically reset it to
sound again on the following day.
TO USE THE SNOOZE ALARM
When alarm is sounding, touch
set snooze duration (5-60 minutes).
To stop the alarm sound, press ALM 1.2 and automatically reset it to sound again on the following day.
, , or below the time digits)
once, the alarm will be silenced and sound again after the
P.4
icon will appear on the clock display
and OFF flashes. Then press ▲ or
and 0:00 and flashes.
and 0:00 and flashes. You could do alarm 2