Makita RF1100 Manual De Instrucciones página 7

Straight guide (optional accessory)
The straight guide is effectively used for straight cuts
when chamfering or grooving.
To install the straight guide, insert the guide bars into
the holes in the tool base. Adjust the distance between
the bit and the straight guide. At the desired distance,
tighten the hex socket bolts to secure the straight guide
in place.
1
2
► 1. Hex socket bolts 2. Guide bar 3. Straight guide
When cutting, move the tool with the straight guide flush
with the side of the workpiece.
Templet guide (optional accessory)
The templet guide provides a sleeve through which
the bit passes, allowing use of the tool with templet
patterns.
To install the templet guide, insert the templet guide in
center hole in the base plate and secure in place with
the lock nut.
► 1. Lock nut 2. Templet guide 3. Base plate 4. Router
Secure the templet to the workpiece. Place the tool on
the templet and move the tool with the templet guide
sliding along the side of the templet.
3
► 1. Router bit 2. Base 3. Templet 4. Workpiece
MAINTENANCE
•
•
7 ENGLISH
1
2
bit
1
2
3
4
5. Templet guide 6. Lock nut
CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
3
4
6
5