Descargar Imprimir esta página

True Temper Clog Free Rake Instrucciones De Montaje

Publicidad

Enlaces rápidos

Packaging Contents / Contenido del embalaje / Contenu de l'emballage
Rake Head with Screw
A
Cabeza de rastrillo con tornillo
x1
Tête du râteau avec vis
Directions
1
Line up the groove in the grip end of handle
(B) with the tab in handle center (C).
IMPORTANT: See Step 1 Image. Swiftly
!
push the two pieces together as far as pos-
sible. Tap the grip end of handle (B) on the
floor until the connection is secure. The end
of handle center (C) should be flush with the
shoulder on handle (B).
To avoid damage to your floor or the
product, place a piece of scrap wood
(not provided) on the floor before
TIP
tapping the handle. You may also
secure the handle connection by tap-
ping the grip end with a rubber mallet.
2
Line up the groove in the head end of handle
(D) with the tab in handle center (C). Swiftly
push the two pieces together as far as pos-
sible. Tap the wood end of handle (D) on the
floor until the connection is secure. The end
of handle center (C) should be flush with the
shoulder on handle (D).
To avoid damage to your floor or the
product, place a piece of scrap wood
(not provided) on the floor before tap-
TIP
ping the handle. You may also secure
the handle connection by tapping
the wood end with a rubber mallet.
3
Unscrew the screw from the back of the rake
head. Insert assembled handle (B/C/D) into
head (A). Lightly tap handle end on the floor
to ensure handle is fully inserted in head.
4
Lay the rake on a flat surface. Use a
Phillips-head screwdriver to fully insert the
screw in to the rake head.
Assembly Instructions
®
Clog Free
Rake - Multi-Material Handle
Handle - Grip End
B
Mango - Extremo
x1
Manche - Poignée
1
2
Tools Required:
Phillips-Head Screwdriver
Handle - Center
C
de agarre
Mango - Centro
x1
Manche - Centre
!
Tab
Lengüeta
Languette
Groove
Ranura
Fente
Shoulder
Borde
Rebord
Easy to
Assemble!
Handle - Head End
D
Mango - Extremo de
x1
Manche - Tête
3
4
WARNING | ADVERTENCIA | AVERTISSEMENT
PINCH HAZARD. Keep hands away
from the connection point when
attaching the wood handle pieces to
the center metal handle piece.
PELIGRO DE PELLIZCO. Mantenga las manos
alejadas del punto de conexión cuando coloque
las piezas del mango de madera en la pieza del
mango de metal central.
RISQUE DE PINCEMENT. Garder les mains à
l'écart du point de raccordement en attachant
les pièces du manche en bois à la pièce cen-
trale en métal du manche.
5
min
la cabeza

Publicidad

loading

Resumen de contenidos para True Temper Clog Free Rake

  • Página 1 Assembly Instructions Tools Required: Easy to Phillips-Head Screwdriver Assemble! ® Clog Free Rake - Multi-Material Handle Packaging Contents / Contenido del embalaje / Contenu de l’emballage Rake Head with Screw Handle - Grip End Handle - Center Handle - Head End Mango - Extremo Mango - Extremo de Cabeza de rastrillo con tornillo...
  • Página 2 Herramientas requeridas: Español Instrucciones de Montaje Destornillador Phillips Rastrillo Clog Free ® - Mango de varios materiales Instrucciones Alinee la ranura del extremo de agarre del mango (B) con la lengüeta del centro (C). IMPORTANTE: Vea la imagen del Paso 1. Pre- sione una pieza contra la otra hasta donde sea posible.