Descargar Imprimir esta página

Energenie EG-UPS-PS2000-02 Manual De Usuario página 6

Ocultar thumbs Ver también para EG-UPS-PS2000-02:

Publicidad

4
Key
combination
In the utility power mode, press "
Select the item to be set in the setting interface. After selecting the required setting, page
down to "save and exit" page. Choose "Yes", press "
In non-setting mode, momentarily press the key twice, and the LCD display content rotates.
GEMBIRD EUROPE B.V.
All brands and logos are registered trademarks of their respective owners
2000 VA PURE SINE WAVE UPS, LCD DISPLAY, 2 X SCHUKO
Press the two keys for 3 seconds to start up.
Press the two keys for 3 seconds to shut down.
Press the setting interface for 5 seconds to restore factory settings and exit the setting
Press "
Press the key for 5 seconds to enter the setting interface.
Press the key momentarily in the setting interface to turn the page.
Press the key for 3 seconds to exit the setting interface without saving data.
In setting mode, when it goes to SAVE page, press "
"Yes", press "
In non-setting mode, press the key momentarily to turn the page (page up).
In setting mode, the parameter decreasing iterates.
In non-setting mode, press the key momentarily to turn the page (page down).
In setting mode, the parameter decreasing iterates.
In non-setting mode, press the key for 2 seconds to enter the state of automatic page
up/down and re-press the key for 2 seconds to exit the state of automatic page up/down.
Function introduction
interface.
" momentarily to enable inverter mute.
" momentarily to enable the battery discharge
testing for 15 seconds.
" momentarily to save the date and
exit the setting mode.
" or "
" to complete the setting and exit the mode.
- 6 -
http://www.gembird.eu
EG-
UPS-PS2000-02
+ 3 X C13 OUTPUTS, USB
" momentarily, choose

Publicidad

loading