B) Connection And Prior Installation; C) Using The Kettle; Looking After And Cleaning Your Machine; A) Cleaning The Kettle - Brandt BO1700X Manual De Instrucciones

b) Connection and Prior Installation

 Close the lid so the seal is hermetic.
 Put the kettle on its base. Unroll the lead and plug the machine in.
c) Using the Kettle
 Press the On/Off button which is below the handle. The indicator light comes on and the
water starts to boil.
 When the water comes to the boil the kettle stops automatically.
Note: if the machine overheats, the kettle stops automatically.
 You can stop the process at any time by pressing the Stop button.
 Always make sure the lid is closed and do not lift it while the water is boiling to prevent
any risk of burns.
 After boiling turn off the kettle by pressing the Stop button and disconnect the base.
 The kettle can now be removed from its base safely and the water can be poured into
cups.
Pour the boiling water slowly and carefully without tipping the kettle too fast, to
prevent any risk of burns.
 After use, put the kettle back on its base.

4) LOOKING AFTER AND CLEANING YOUR MACHINE

a) Cleaning the Kettle
Before cleaning it unplug the machine and let it cool completely.
 Clean the outside of the kettle with a slightly damp cloth and make sure the electrical
components are always kept dry.
 Do not use abrasive chemicals or solvents.
 To avoid limescale particles in the liquid, the kettle has a filter. To clean the filter remove
it by pulling it upwards. Clean it under the tap with a soft brush to remove the encrusted
limescale. The filter can be cleaned in the dishwasher.
 Clean the inside of the kettle with soapy water.
Never immerse the base of the machine in water or any other liquid.
b) Maintenance Instructions
Over time it is possible that limescale deposits will form inside the kettle. Excess limescale
prevents the machine working properly. It is therefore recommended that the kettle is descaled.
To do this:
18