Makita DUH506 Manual De Instrucciones página 10

7. Slide the shear blades slightly as shown in the
figure, and then attach the sleeves to the shear blades.
Fig.11
► 1 . Sleeve
8.
Slide the blade cover slightly toward the tip of the
shear blades, and then attach the shear blades to the
tool.
Fig.12
► 1 . Shear blades
NOTICE:
Apply a small amount of grease to the
inner periphery of the hole of the shear blades.
NOTICE:
Be careful not to lose the sleeves.
9. Slide the shear blades and sleeves so that the
holes on the sleeves are aligned with the holes on the
tool.
1
2
Fig.13
► 1 . Hole on tool 2. Hole on sleeve
10. Tighten the bolts to fix the shear blades.
1
Fig.14
► 1 . Bolt
10 ENGLISH
1
1