Publicidad
Idiomas disponibles
Idiomas disponibles
OSD MENU
.In normal working mode, press the menu button on the IR remote,
to enter the OSD menu ; press the menu button again to exit and
save modified parameters;
. Use the navigate button to
select the main menu. As above
picture, once been selected, the
main menu will change to grey
color background, and the right
side will show all parameters
under this sub menu :;
menu, press the up/down
navigate button to select the sub
menu, use left/right navigate
button to set the parameter;
last level menu, select the "return"
and then press the left or right
navigate button to get back to
previous menu;
the menu.;
All manuals and user guides at all-guides.com
6.OSD Menu Layout:
LANGUAGE
PROTOCOL
VISCA,PELCO-P , PELCO-D
ADDRESS
VISCA:1~7 ;PELCO-P/D:0~255
BAUD RATE
2400,4800,9600,115200 optional
SYSTEM
MASK
Subnet mask Default:255.255.255.000
Gateway
GW
RETURN
SHUTTER
GAIN
EXPOSURE
BRIGHT
FLICK
B
GAMMA
RETURN
Back to the main menu
AUTO/MANUAL/INDOOR/OUTDOOR
/ SODIUM LAMP/KEY CONTROL
WB MODE
Red gain level: 0~255, only valid
R-GAIN
under manual white
Blue gain level:0~255 , only valid
IMAGE
B-GAIN
under manual white
Set the image permeability, should not
be too large, otherwise it will affect
DEFOG
the gray level of the picture
RETURN
ENGLISH/CHINESE
Defaulted: VISCA
Defaulted: 1
Defaulted:
9600
DHCP ON/OFF
Defaulted: OFF
IP address Default:192.168.001.188
Default:192.168.001.001
Back to the main menu
Defaulted:AUTO
Defaulted:1/100
Defaulted:0
Defaulted:11
Defaulted:50Hz
ON/OFF
Defaulted: OFF
Defaulted:0
0~4
Defaulted:AUTO
/AUTO TRACKNG
Defaulted:58
balance mode
Defaulted:52
balance mode
Defaulted:0
Back to the main menu
Publicidad
